Bothways v8 — native slicing and digital assembly checks passed.
Physical fit and strength remain unverified.

{
  "geometry": {
    "source": "work/source-v7.3mf",
    "source_sha256": "a07b88576e50d5346910233143164e862859a2a7b5f0da17d2a667d83f88015b",
    "id": "mbr54808",
    "revision": "v8 all-printed assembly: integral female threads and printed fasteners; smooth front",
    "lower_angle_change_deg": 20,
    "upper_angle_from_original_deg": 45,
    "post_length_mm": 190,
    "assembled_pole_top_mm": 194,
    "physical_fit_verified": false,
    "sign_reused": "01-cumberland-halloween-v2.3mf",
    "sign_intersections": [
      {
        "part": "Halloween blade 1 midnight",
        "post_mm3": 1.1074732469560356e-11,
        "cap_mm3": -1.1368683772161603e-13
      },
      {
        "part": "Halloween blade 1 pumpkin orange",
        "post_mm3": 0.0,
        "cap_mm3": 0.0
      },
      {
        "part": "Halloween blade 1 moonlight",
        "post_mm3": 0.0,
        "cap_mm3": 0.0
      },
      {
        "part": "Halloween blade 1 cream type",
        "post_mm3": 0.0,
        "cap_mm3": 0.0
      },
      {
        "part": "Halloween blade 2 midnight",
        "post_mm3": 0.0,
        "cap_mm3": 0.0
      },
      {
        "part": "Halloween blade 2 pumpkin orange",
        "post_mm3": 0.0,
        "cap_mm3": 0.0
      },
      {
        "part": "Halloween blade 2 moonlight",
        "post_mm3": 0.0,
        "cap_mm3": 0.0
      },
      {
        "part": "Halloween blade 2 cream type",
        "post_mm3": 0.0,
        "cap_mm3": 0.0
      }
    ],
    "post_half_solids": [
      1,
      1
    ],
    "print_bounds": {
      "01-post-and-clamps-v8": [
        {
          "name": "Post front half - lower cradle +20 degrees",
          "bounds": [
            20.0,
            30.0,
            0.0,
            94.32553594471659,
            218.0,
            30.13372731567769
          ]
        },
        {
          "name": "Post rear half",
          "bounds": [
            117.0,
            30.0,
            0.0,
            168.37457758160875,
            218.0,
            15.556349186104045
          ]
        },
        {
          "name": "Sign retaining cap 1",
          "bounds": [
            190.0,
            55.0,
            0.0,
            214.7,
            129.0,
            6.700000000000017
          ]
        },
        {
          "name": "Sign retaining cap 2",
          "bounds": [
            190.0,
            150.0,
            0.0,
            236.0,
            174.7,
            6.700000000000017
          ]
        },
        {
          "name": "Alignment dowel 1",
          "bounds": [
            192.5,
            207.5,
            0.0,
            197.5,
            212.5,
            11.0
          ]
        },
        {
          "name": "Alignment dowel 2",
          "bounds": [
            207.5,
            207.5,
            0.0,
            212.5,
            212.5,
            11.0
          ]
        }
      ],
      "02-map-base-mbr54808-v8": [
        {
          "name": "Map base mbr54808 - Printed underside lock",
          "bounds": [
            76.0,
            92.0,
            0.0,
            180.0,
            184.0,
            16.0
          ]
        },
        {
          "name": "Orange map marker",
          "bounds": [
            118.19999960999999,
            119.9,
            16.000000018999998,
            126.60000019,
            128.4,
            17.200000781
          ]
        }
      ],
      "00-fit-test-v8": [
        {
          "name": "Cradle test front",
          "bounds": [
            35.0,
            80.0,
            0.0,
            109.32553594471659,
            136.0,
            30.13372731567769
          ]
        },
        {
          "name": "Cradle test rear",
          "bounds": [
            115.0,
            80.0,
            0.0,
            166.37457758160875,
            136.0,
            15.556349186104045
          ]
        },
        {
          "name": "Cap test",
          "bounds": [
            200.0,
            80.0,
            0.0,
            224.7,
            154.0,
            6.700000000000017
          ]
        },
        {
          "name": "Foot test front",
          "bounds": [
            60.0,
            170.0,
            0.0,
            84.0,
            190.0,
            12.0
          ]
        },
        {
          "name": "Foot test rear",
          "bounds": [
            100.0,
            170.0,
            0.0,
            124.0,
            190.0,
            12.0
          ]
        },
        {
          "name": "Base lock test",
          "bounds": [
            145.0,
            165.0,
            0.0,
            177.0,
            197.0,
            16.0
          ]
        },
        {
          "name": "Printed post screw",
          "bounds": [
            35.0,
            35.0,
            0.0,
            51.0,
            51.0,
            23.4
          ]
        },
        {
          "name": "Printed cap screw 1",
          "bounds": [
            70.0,
            35.0,
            0.0,
            80.0,
            45.0,
            13.7
          ]
        },
        {
          "name": "Printed cap screw 2",
          "bounds": [
            95.0,
            35.0,
            0.0,
            105.0,
            45.0,
            13.7
          ]
        },
        {
          "name": "Printed base screw",
          "bounds": [
            125.0,
            35.0,
            0.0,
            143.0,
            53.0,
            16.2
          ]
        },
        {
          "name": "Printed turning key",
          "bounds": [
            165.0,
            35.0,
            0.0,
            185.0,
            43.0,
            8.0
          ]
        }
      ],
      "03-printed-fasteners-v8": [
        {
          "name": "Printed post screw 1",
          "bounds": [
            45.0,
            75.0,
            0.0,
            61.0,
            91.0,
            23.4
          ]
        },
        {
          "name": "Printed post screw 2",
          "bounds": [
            85.0,
            75.0,
            0.0,
            101.0,
            91.0,
            23.4
          ]
        },
        {
          "name": "Printed post screw 3",
          "bounds": [
            125.0,
            75.0,
            0.0,
            141.0,
            91.0,
            23.4
          ]
        },
        {
          "name": "Printed post screw 4",
          "bounds": [
            165.0,
            75.0,
            0.0,
            181.0,
            91.0,
            23.4
          ]
        },
        {
          "name": "Printed cap screw 1",
          "bounds": [
            45.0,
            125.0,
            0.0,
            55.0,
            135.0,
            13.7
          ]
        },
        {
          "name": "Printed cap screw 2",
          "bounds": [
            85.0,
            125.0,
            0.0,
            95.0,
            135.0,
            13.7
          ]
        },
        {
          "name": "Printed cap screw 3",
          "bounds": [
            125.0,
            125.0,
            0.0,
            135.0,
            135.0,
            13.7
          ]
        },
        {
          "name": "Printed cap screw 4",
          "bounds": [
            165.0,
            125.0,
            0.0,
            175.0,
            135.0,
            13.7
          ]
        },
        {
          "name": "Printed base screw",
          "bounds": [
            80.0,
            175.0,
            0.0,
            98.0,
            193.0,
            16.2
          ]
        },
        {
          "name": "Printed turning key",
          "bounds": [
            135.0,
            175.0,
            0.0,
            155.0,
            183.0,
            8.0
          ]
        }
      ]
    }
  },
  "slices": [
    {
      "file": "00-fit-test-v8.3mf",
      "sha256": "095f92a57aba284a40e3058fe9ccf9f7ecdbf470cd7fc14d15830ceb063c5ca1",
      "slicer": "Bambu Studio 2.8.2.61",
      "success": true,
      "warnings": "",
      "grams": 78.73930358886719,
      "model_grams": 78.73930358886719,
      "minutes": 361.93072916666665,
      "color_changes": 0,
      "layers": 150,
      "max_print_height_mm": 30.0,
      "minimum_bed_edge_mm": 26.557999999999993,
      "support_segments": 9302,
      "clearance": {
        "passed": true,
        "tower_segments": 0,
        "tower_bounds_mm": null,
        "clearance_mm": 0.5,
        "method": "Actual deposited tower width inside safe bed; conservative instance XY bounds plus support/brim/skirt paths."
      },
      "parts": [
        {
          "name": "Cradle test front",
          "watertight": true,
          "connected_solids": 1,
          "volume_mm3": 36582.141881076335
        },
        {
          "name": "Cradle test rear",
          "watertight": true,
          "connected_solids": 1,
          "volume_mm3": 19259.90337942122
        },
        {
          "name": "Cap test",
          "watertight": true,
          "connected_solids": 1,
          "volume_mm3": 3226.2607360047878
        },
        {
          "name": "Foot test front",
          "watertight": true,
          "connected_solids": 1,
          "volume_mm3": 3779.5381518239496
        },
        {
          "name": "Foot test rear",
          "watertight": true,
          "connected_solids": 1,
          "volume_mm3": 3780.749095417028
        },
        {
          "name": "Base lock test",
          "watertight": true,
          "connected_solids": 1,
          "volume_mm3": 11262.568628002788
        },
        {
          "name": "Printed post screw",
          "watertight": true,
          "connected_solids": 1,
          "volume_mm3": 1437.0749684181055
        },
        {
          "name": "Printed cap screw 1",
          "watertight": true,
          "connected_solids": 1,
          "volume_mm3": 379.5300715951389
        },
        {
          "name": "Printed cap screw 2",
          "watertight": true,
          "connected_solids": 1,
          "volume_mm3": 379.5300715951383
        },
        {
          "name": "Printed base screw",
          "watertight": true,
          "connected_solids": 1,
          "volume_mm3": 1079.057934844425
        },
        {
          "name": "Printed turning key",
          "watertight": true,
          "connected_solids": 1,
          "volume_mm3": 683.1999988479996
        }
      ],
      "mark": null,
      "previews": {
        "path_segments": 680725,
        "layer_count": 150,
        "preview_layers": [
          1,
          2,
          3,
          14,
          28,
          41,
          55,
          68,
          82,
          95,
          109,
          122,
          136,
          150
        ],
        "method": "Actual positive object extrusion, orthographic projections in configured filament colors. Supports/tower omitted; not simulated physical finish."
      },
      "physical_fit_verified": false,
      "gui_verified": false
    },
    {
      "file": "01-post-and-clamps-v8.3mf",
      "sha256": "d4a9478ba7cc4a8332eeaad7a771f0e8e2de7ac8d8ac43614ff6b3246b61cc24",
      "slicer": "Bambu Studio 2.8.2.61",
      "success": true,
      "warnings": "",
      "grams": 117.69062042236328,
      "model_grams": 117.69062042236328,
      "minutes": 526.3056315104167,
      "color_changes": 0,
      "layers": 150,
      "max_print_height_mm": 30.0,
      "minimum_bed_edge_mm": 15.979000000000013,
      "support_segments": 13678,
      "clearance": {
        "passed": true,
        "tower_segments": 0,
        "tower_bounds_mm": null,
        "clearance_mm": 0.5,
        "method": "Actual deposited tower width inside safe bed; conservative instance XY bounds plus support/brim/skirt paths."
      },
      "parts": [
        {
          "name": "Post front half - lower cradle +20 degrees",
          "watertight": true,
          "connected_solids": 1,
          "volume_mm3": 72262.90416220065
        },
        {
          "name": "Post rear half",
          "watertight": true,
          "connected_solids": 1,
          "volume_mm3": 51167.50918913993
        },
        {
          "name": "Sign retaining cap 1",
          "watertight": true,
          "connected_solids": 1,
          "volume_mm3": 3226.2607360047805
        },
        {
          "name": "Sign retaining cap 2",
          "watertight": true,
          "connected_solids": 1,
          "volume_mm3": 2283.43196781254
        },
        {
          "name": "Alignment dowel 1",
          "watertight": true,
          "connected_solids": 1,
          "volume_mm3": 215.6377095291961
        },
        {
          "name": "Alignment dowel 2",
          "watertight": true,
          "connected_solids": 1,
          "volume_mm3": 215.6377095291973
        }
      ],
      "mark": null,
      "previews": {
        "path_segments": 1107153,
        "layer_count": 150,
        "preview_layers": [
          1,
          2,
          3,
          14,
          28,
          41,
          55,
          68,
          82,
          95,
          109,
          122,
          136,
          150
        ],
        "method": "Actual positive object extrusion, orthographic projections in configured filament colors. Supports/tower omitted; not simulated physical finish."
      },
      "physical_fit_verified": false,
      "gui_verified": false
    },
    {
      "file": "02-map-base-mbr54808-v8.3mf",
      "sha256": "a0518ebf996474c338304ae18d6f021b18b8b97e40ffa604c3a454da85ed3a9a",
      "slicer": "Bambu Studio 2.8.2.61",
      "success": true,
      "warnings": "",
      "grams": 91.44165390729904,
      "model_grams": 88.46938708052039,
      "minutes": 419.5171875,
      "color_changes": 1,
      "layers": 86,
      "max_print_height_mm": 17.2,
      "minimum_bed_edge_mm": 21.529,
      "support_segments": 0,
      "clearance": {
        "passed": true,
        "tower_segments": 5477,
        "tower_bounds_mm": [
          21.529006297981116,
          21.54112564506913,
          52.97890925347417,
          52.54199294084949
        ],
        "clearance_mm": 0.5,
        "method": "Actual deposited tower width inside safe bed; conservative instance XY bounds plus support/brim/skirt paths."
      },
      "parts": [
        {
          "name": "Map base mbr54808 - Printed underside lock",
          "watertight": true,
          "connected_solids": 1,
          "volume_mm3": 133705.82955806842
        },
        {
          "name": "Orange map marker",
          "watertight": true,
          "connected_solids": 1,
          "volume_mm3": 31.779231500070257
        }
      ],
      "mark": [
        {
          "z": 0.2,
          "clear_fraction": 1.0
        },
        {
          "z": 0.4,
          "clear_fraction": 1.0
        },
        {
          "z": 0.6,
          "clear_fraction": 1.0
        }
      ],
      "previews": {
        "path_segments": 1232644,
        "layer_count": 86,
        "preview_layers": [
          1,
          2,
          3,
          8,
          16,
          24,
          31,
          39,
          47,
          55,
          62,
          70,
          78,
          86
        ],
        "method": "Actual positive object extrusion, orthographic projections in configured filament colors. Supports/tower omitted; not simulated physical finish."
      },
      "physical_fit_verified": false,
      "gui_verified": false
    },
    {
      "file": "03-printed-fasteners-v8.3mf",
      "sha256": "341e4548453606d0b70e1f609f4fd496747bb10e3ed1b0faf8f1405ccf0b6df6",
      "slicer": "Bambu Studio 2.8.2.61",
      "success": true,
      "warnings": "",
      "grams": 11.488682746887207,
      "model_grams": 11.488682746887207,
      "minutes": 74.4603271484375,
      "color_changes": 0,
      "layers": 117,
      "max_print_height_mm": 23.4,
      "minimum_bed_edge_mm": 40.26,
      "support_segments": 0,
      "clearance": {
        "passed": true,
        "tower_segments": 0,
        "tower_bounds_mm": null,
        "clearance_mm": 0.5,
        "method": "Actual deposited tower width inside safe bed; conservative instance XY bounds plus support/brim/skirt paths."
      },
      "parts": [
        {
          "name": "Printed post screw 1",
          "watertight": true,
          "connected_solids": 1,
          "volume_mm3": 1437.0749684181053
        },
        {
          "name": "Printed post screw 2",
          "watertight": true,
          "connected_solids": 1,
          "volume_mm3": 1437.0749684181053
        },
        {
          "name": "Printed post screw 3",
          "watertight": true,
          "connected_solids": 1,
          "volume_mm3": 1437.0749684181046
        },
        {
          "name": "Printed post screw 4",
          "watertight": true,
          "connected_solids": 1,
          "volume_mm3": 1437.07496841811
        },
        {
          "name": "Printed cap screw 1",
          "watertight": true,
          "connected_solids": 1,
          "volume_mm3": 379.5268679917305
        },
        {
          "name": "Printed cap screw 2",
          "watertight": true,
          "connected_solids": 1,
          "volume_mm3": 379.5337153930947
        },
        {
          "name": "Printed cap screw 3",
          "watertight": true,
          "connected_solids": 1,
          "volume_mm3": 379.5349831725046
        },
        {
          "name": "Printed cap screw 4",
          "watertight": true,
          "connected_solids": 1,
          "volume_mm3": 379.53067127599326
        },
        {
          "name": "Printed base screw",
          "watertight": true,
          "connected_solids": 1,
          "volume_mm3": 1079.054626101827
        },
        {
          "name": "Printed turning key",
          "watertight": true,
          "connected_solids": 1,
          "volume_mm3": 683.1999988480002
        }
      ],
      "mark": null,
      "previews": {
        "path_segments": 190638,
        "layer_count": 117,
        "preview_layers": [
          1,
          2,
          3,
          11,
          22,
          32,
          43,
          53,
          64,
          74,
          85,
          95,
          106,
          117
        ],
        "method": "Actual positive object extrusion, orthographic projections in configured filament colors. Supports/tower omitted; not simulated physical finish."
      },
      "physical_fit_verified": false,
      "gui_verified": false
    }
  ],
  "assembly": {
    "zero_assembly_intersections": true,
    "retention_checks": [
      {
        "blade": 1,
        "direction": "left",
        "blocked_at_translation_mm": 1,
        "interference_mm3": 21.776935989129523
      },
      {
        "blade": 1,
        "direction": "right",
        "blocked_at_translation_mm": 1,
        "interference_mm3": 21.77694505065288
      },
      {
        "blade": 1,
        "direction": "forward",
        "blocked_at_translation_mm": 1,
        "interference_mm3": 7.7015712256364335
      },
      {
        "blade": 1,
        "direction": "back",
        "blocked_at_translation_mm": 1,
        "interference_mm3": 2186.9150302841326
      },
      {
        "blade": 1,
        "direction": "up",
        "blocked_at_translation_mm": 1,
        "interference_mm3": 147.60896974110975
      },
      {
        "blade": 1,
        "direction": "down",
        "blocked_at_translation_mm": 1,
        "interference_mm3": 147.6089697411055
      },
      {
        "blade": 2,
        "direction": "left",
        "blocked_at_translation_mm": 1,
        "interference_mm3": 21.776943249883647
      },
      {
        "blade": 2,
        "direction": "right",
        "blocked_at_translation_mm": 1,
        "interference_mm3": 21.77695231155887
      },
      {
        "blade": 2,
        "direction": "forward",
        "blocked_at_translation_mm": 1,
        "interference_mm3": 7.7015488749274486
      },
      {
        "blade": 2,
        "direction": "back",
        "blocked_at_translation_mm": 1,
        "interference_mm3": 1351.9548476900636
      },
      {
        "blade": 2,
        "direction": "up",
        "blocked_at_translation_mm": 1,
        "interference_mm3": 147.60885215150344
      },
      {
        "blade": 2,
        "direction": "down",
        "blocked_at_translation_mm": 1,
        "interference_mm3": 147.60885215150367
      }
    ],
    "hardware_clearance": [
      {
        "fastener": "post-screw-32",
        "plastic_intersection_mm3": 6.831341048396666e-14,
        "printed": true
      },
      {
        "fastener": "post-screw-72",
        "plastic_intersection_mm3": 3.3383018571697676e-14,
        "printed": true
      },
      {
        "fastener": "post-screw-104",
        "plastic_intersection_mm3": 4.2042758163773897e-14,
        "printed": true
      },
      {
        "fastener": "post-screw-174",
        "plastic_intersection_mm3": 3.449324159632283e-14,
        "printed": true
      },
      {
        "fastener": "cap-screw-130--30",
        "plastic_intersection_mm3": 2.815380307358284e-14,
        "printed": true
      },
      {
        "fastener": "cap-screw-130-30",
        "plastic_intersection_mm3": 2.1679300065205465e-14,
        "printed": true
      },
      {
        "fastener": "cap-screw-170--16",
        "plastic_intersection_mm3": 6.39253732413747e-14,
        "printed": true
      },
      {
        "fastener": "cap-screw-170-16",
        "plastic_intersection_mm3": 2.0794997668271975e-14,
        "printed": true
      },
      {
        "fastener": "base-screw",
        "plastic_intersection_mm3": 0.0,
        "printed": true
      }
    ],
    "printed_fastener_count": 9,
    "purchased_hardware_required": false,
    "thread_pitch_mm": 3.0,
    "radial_clearance_mm": 0.25,
    "front_pole_holes": 0,
    "physical_fit_verified": false
  },
  "thread_toolpaths": [
    {
      "post_height_mm": 32,
      "core_radius_checked_mm": 3.0,
      "depth_checked_mm": 7.4,
      "object_minimum_deposit_distance_mm": 3.420435730604361,
      "support_minimum_deposit_distance_mm": 9.759557114470013
    },
    {
      "post_height_mm": 72,
      "core_radius_checked_mm": 3.0,
      "depth_checked_mm": 7.4,
      "object_minimum_deposit_distance_mm": 3.420489611033682,
      "support_minimum_deposit_distance_mm": 35.55276510839384
    },
    {
      "post_height_mm": 104,
      "core_radius_checked_mm": 3.0,
      "depth_checked_mm": 7.4,
      "object_minimum_deposit_distance_mm": 3.4195068215262814,
      "support_minimum_deposit_distance_mm": 11.959668522252036
    },
    {
      "post_height_mm": 174,
      "core_radius_checked_mm": 3.0,
      "depth_checked_mm": 7.4,
      "object_minimum_deposit_distance_mm": 3.4204122625342213,
      "support_minimum_deposit_distance_mm": 29.617955782364383
    }
  ],
  "base_detail": [
    {
      "layer_z": 15.4,
      "map_recess_clear_fraction": 1.0
    },
    {
      "layer_z": 15.6,
      "map_recess_clear_fraction": 1.0
    },
    {
      "layer_z": 15.8,
      "map_recess_clear_fraction": 1.0
    },
    {
      "layer_z": 16.0,
      "map_recess_clear_fraction": 1.0
    }
  ],
  "visual_review": {
    "status": "Final extrusion images reviewed for every plate; full base underside and three recessed mark layers inspected.",
    "physical_fit_verified": false,
    "gui_import_verified": false
  }
}